Hi to all
I am looking to get a stock system and i have found something i like but can anyone who has cut a stock system please give some advise on the following
Here is the stock systems design
Size: 8''(w)x 10''(l)
Hair: 6" long human hair (synthetic or human hair for grey)
Hair direction: Freestyle
Curl & Wave: 30mm slight wave
Density: Light to Light Medium (90%)
Base Information: Full Swiss Lace, 1'' extra lace all over for cutting off, Bleach knots at front hairline.
The stock system is to big for my needs so i will have to cut this down to the correct size to suit my template
The problem i have is that the stock system is an A contour and i am a C contour.
My question is as the size of the stock system is 8''(w)x 10''(l) and my template size is 4''(w)x 7''(l) is this able to be cut to a C contour from an A contour as the stock item is to big.Or does the original A contour not matter as you have to cut this down to suit your own needs
thanks
munt
I am looking to get a stock system and i have found something i like but can anyone who has cut a stock system please give some advise on the following
Here is the stock systems design
Size: 8''(w)x 10''(l)
Hair: 6" long human hair (synthetic or human hair for grey)
Hair direction: Freestyle
Curl & Wave: 30mm slight wave
Density: Light to Light Medium (90%)
Base Information: Full Swiss Lace, 1'' extra lace all over for cutting off, Bleach knots at front hairline.
The stock system is to big for my needs so i will have to cut this down to the correct size to suit my template
The problem i have is that the stock system is an A contour and i am a C contour.
My question is as the size of the stock system is 8''(w)x 10''(l) and my template size is 4''(w)x 7''(l) is this able to be cut to a C contour from an A contour as the stock item is to big.Or does the original A contour not matter as you have to cut this down to suit your own needs
thanks
munt